A two channel amplifier features a built in high, low, and full pass crossover which is ideal for running either full range speakers or subs however not both at the same time. In essence, a Earthquake Sound MOSFET Amplifier TNT Series 2-Channel handles the left and right audio, connected to run the subwoofer.
This Earthquake Sound amplifier comes with enough power to carry your speakers, irrespective of its size.
With this device, you get a lot of special features such as speaker and RCA level inputs, built in variable filters, three way operational (High Pass/Full Range/Low Pass) modes and many others.
Sold for $119.99 on amazon, the price tends to vary across various electronic digital stores.
Table of Contents
Earthquake Sound TNT Series T1000W/2 2-Channel Review
With this 1400 watts (stereo) two channel amplifier (class A/B), comes equipped with massive MOSFET power supplies and high quality circuitry for more power and a clearer and better sound. Named after its nature, this product reflects durability and power.
You should know that this device has been developed with amazing features such as noise cancellation and distortion removal. With a signal to noise ratio of 95dB below rated power, the device helps clear unnecessary sounds around the immediate environment while emitting high quality audio as you drive.
Additionally, the TNT Series T1000W comes with an AUTO SENSING feature that enables you to turn on and connect to the device without using the remote wire control.
When you connect the amplifier to the speaker level inputs or RCA, the device will automatically turn on once it senses an audio signal.
This model is better suited for recent model cars as it upgrades the sound system to suit the standard of your car, connecting you to your sound system with less stress.
What is Product For?
This amplifier comes with three way operational modes (high pass, full range and low pass modes). Its ability to adjust and maintain a balance between these modes make the device emit high quality sound with reduced distortion and produce clearer audio. The device is built to reflect the following qualities
- Affordability
- High performance
Who is Product for and How is it Helpful?
Sold for a bit above a hundred dollars, this amplifier is very cheap when compared to other car amplifiers with similar features.
Built with massive MOSFET power supplies which enables it to be given a better power circuit and emit clean sounds. It is one of Best amplifier kenwood Excelon Amplifier.
FAQ’s Related too Earthquake Sound TNT Series 2-Channel
-
Does the amplifier come with a remote sub control?
Yes. This product comes with a remote sub level control.
-
Is this amp a 12v or 14v or 16v powered device?
The device is a 12v direct current powered device.
-
Is the amplifier class D enabled?
Yes, it is.
How to install the device on a car
This brand new device pack comes with a manual that contains all the instructions and procedures on how to install the device in your car.
Request professional help if you encounter any difficulties when installing.
Pros
- Class D enabled
- Optimum performance
- Auto signal sensing
- 3 way operational modes
- Very affordable
- Noise cancelling
- 30 days guarantee
- 2 years product warranty
- Easy to install
- Easy maintenance
Cons
- Not highly durable
- Consumes a lot of battery current
- Quickly enters protect mode
Conclusion
Earthquake T1000W car amplifier is a handy device that comes with a 30 days guarantee span which means that you can return the device and get a full refund 30 days after initial purchase.
This product also comes with a 2 years warranty period so you don’t have to get worked up about your amp developing faults soon after you purchase it.
Another thing with this amplifier that makes it unique from others is the fact that it is clearly one of the most affordable ones you can get anywhere.
Visit the company’s official website to know more about the product at: